| Last Modified: 11-29-2007 | 1.6 T | |
| Service Category: Vehicle Exterior | Section: Door/Hatch | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000025T200AX |
| Title: DOOR / HATCH: POWER BACK DOOR SYSTEM: PROBLEM SYMPTOMS TABLE (2008 Sequoia) | ||
PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Power Back Door System
|
Symptom |
Suspected Area |
See page |
|---|---|---|
|
Power Back Door cannot be Operated Using Any Switch |
Proceed to Power Back Door cannot be Operated Using Any Switch |
|
|
Power Back Door cannot be Opened or Closed Using the Power Back Door Switch |
Proceed to Power Back Door cannot be Opened or Closed Using the Power Back Door Switch |
|
|
Power Back Door cannot be Closed Using the Power Back Door Closer Switch |
Proceed to Power Back Door cannot be Closed Using the Power Back Door Closer Switch |
|
|
Power Back Door Warning System does not Operate |
Proceed to Power Back Door Warning System does not Operate |
|
|
Jam protection function is activated while power back door is operating |
Proceed to Jam protection function is activated while power back door is operating |
|
|
Only Wireless Control Function is Inoperative |
Proceed to Only Wireless Control Function is Inoperative |
|
|
|